\input texinfo    @c -*- texinfo -*-
@c %**start of header
@setfilename forge.info
@settitle Forge User and Developer Manual
@documentencoding UTF-8
@documentlanguage en
@c %**end of header

@copying
@quotation
Copyright (C) 2018-2026 Jonas Bernoulli <emacs.forge@@jonas.bernoulli.dev>

You can redistribute this document and/or modify it under the terms
of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option) any
later version.

This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE@.  See the GNU
General Public License for more details.

@end quotation
@end copying

@dircategory Emacs
@direntry
* Forge: (forge).       Access Git Forges from Magit.
@end direntry

@finalout
@titlepage
@title Forge User and Developer Manual
@subtitle for version 0.6.8
@author Jonas Bernoulli
@page
@vskip 0pt plus 1filll
@insertcopying
@end titlepage

@contents

@ifnottex
@node Top
@top Forge User and Developer Manual

Forge allows you to work with Git forges, currently Github and Gitlab,
from the comfort of Magit and Emacs.

@noindent
This manual is for Forge version 0.6.8.

@insertcopying
@end ifnottex

@menu
* Introduction::
* Initial Setup::
* Initial Pull::
* Getting Started::
* Lists and Menus::
* Visiting Topics::
* Creating Topics and Posts::
* Editing Topics::
* Pulling::
* Branching::
* Miscellaneous Commands::
* Miscellaneous Options::
* How Forge Detection Works::
* Supported Forges and Hosts::
* FAQ::
* Keystroke Index::
* Function and Command Index::
* Variable Index::

@detailmenu
--- The Detailed Node Listing ---

Initial Setup

* Setup for Github.com: Setup for Githubcom. 
* Setup for Another Github Instance::
* Setup for Gitlab.com: Setup for Gitlabcom. 
* Setup for Another Gitlab Instance::
* Setup a Partially Supported Host::

Supported Forges and Hosts

* Supported Forges::
* Partially Supported Forges::
* Supported Semi-Forges::

FAQ

* @code{error in process filter HTTP Error 502, "Bad gateway"}: @code{error in process filter HTTP Error 502 "Bad gateway"}. 

@end detailmenu
@end menu

@node Introduction
@chapter Introduction

Forge allows you to work with Git forges, currently Github and Gitlab,
from the comfort of Magit and Emacs.

Forge fetches issues, pull-requests and other data using the forge's
API and stores the retrieved information in a local database.
Additionally it fetches pull-request references using Git.

@node Initial Setup
@chapter Initial Setup

Please first do the common setup below and then carefully follow the
instructions for your forge instance.  Once you have completed the
setup, you can start tracking repositories (see @ref{Initial Pull}).

If you run into difficulties during setup or the initial pull, then
please also see @ref{How Forge Detection Works} and @ref{Getting Started,,,ghub,}.

@menu
* Setup for Github.com: Setup for Githubcom. 
* Setup for Another Github Instance::
* Setup for Gitlab.com: Setup for Gitlabcom. 
* Setup for Another Gitlab Instance::
* Setup a Partially Supported Host::
@end menu

@anchor{Common Setup}
@heading Common Setup

Loading Magit doesn't cause Forge to be loaded automatically.  Adding
something like this to your init file takes care of that:

@lisp
(with-eval-after-load 'magit
  (require 'forge))
@end lisp

@noindent
Or if you use @code{use-package}:

@lisp
(use-package forge
  :after magit)
@end lisp

By default Forge adds some bindings to Magit keymaps and menus, and
some sections to Magit buffers.  If you would like to prevent that,
you have to set @code{forge-add-default-bindings} and/or
@code{forge-add-default-sections} to @code{nil}, before @code{magit} (not just @code{forge}) is
loaded.

@node Setup for Githubcom
@section Setup for Github.com

@anchor{Set your Username}
@subheading Set your Username

First inform Forge about your @uref{https://github.com} username:

@example
git config --global github.user USERNAME
@end example

If you need to identify as another user in a particular repository,
then you have to set that variable locally:

@example
cd /path/to/repo
git config --local github.user USERNAME
@end example

@anchor{Create and Store an Access Token}
@subheading Create and Store an Access Token

Visit @uref{https://github.com/settings/tokens} in a browser to generate
a new "classic" token using the @code{repo}, @code{user} and @code{read:org} scopes.
Do not close the browser window just yet, because the token will
only be shown once.

The built-in Auth-Source (@ref{Top,,,auth,}) package is used to store the
token generated in the previous step.  The @code{auth-sources} variable
controls how and where Auth-Source keeps its secrets.  The default
value is a list of three files: @code{("~/.authinfo" "~/.authinfo.gpg"
"~/.netrc")}, but that can lead to confusing behavior, so you should
make sure that only one of these files exists, and then you should
also adjust the value of the variable to only ever use that file,
for example:

@lisp
(setq auth-sources '("~/.authinfo"))
@end lisp

In @code{~/.authinfo} secrets are stored in plain text.  If you don't want
that, then you should use the encrypted @code{~/.authinfo.gpg} instead:

@lisp
(setq auth-sources '("~/.authinfo.gpg"))
@end lisp

Make sure you put one of these forms in your init file @strong{and} to evaluate
it in the current Emacs instance as well, by placing the cursor after
the final closing parenthesis and typing @code{C-x C-e} (@code{eval-last-sexp}).

Next add a line like the following to the chosen file:

@example
machine api.github.com login USERNAME^forge password TOKEN
@end example

@itemize
@item
The value of @code{machine} must be @code{api.github.com}.  Variations of this
won't work.

@item
USERNAME must be the same as the value used for the @code{github.user} Git
variable above.  You @strong{must} append @code{^forge} to that, without any space
in between.

@item
TOKEN is the token you generated earlier.
@end itemize

Finish by typing @code{M-x auth-source-forget-all-cached RET}.  If you don't
do this, then Auth-Source may fail to look up the token.

@node Setup for Another Github Instance
@section Setup for Another Github Instance

Before you setup a Github instance that is not @uref{https://github.com},
please first setup the latter.  The setup for @uref{https://github.com} is
easier, and if that works but the setup for the other Github instance
fails, then we can tentatively narrow the issue down to the parts that
differ between @uref{https://github.com} and other instances.

@anchor{Tell Forge about the Instance}
@subheading Tell Forge about the Instance

While Forge knows about @uref{https://github.com}, it does not know about
your other Github instances.  Forge instances are configured using
the option @code{forge-alist} (also see its docstring).  The entry for
@uref{https://github.com} in that variable looks like this:

While Forge knows about @uref{https://github.com} out of the box, for all
other instances you have to add a new entry to option @code{forge-alist}.

The entry for @uref{https://github.com} looks like this:

@lisp
("github.com"                       ; GITHOST
 "api.github.com"                   ; APIHOST
 "github.com"                       ; WEBHOST and INSTANCE-ID
  forge-github-repository)          ; CLASS
@end lisp

You have to add an entry for your instance.  For example, assuming
your company uses @uref{https://example.com}, this might be correct:

@lisp
(push '("example.com"               ; GITHOST
        "api.example.com"           ; APIHOST
        "example.com"               ; WEBHOST and INSTANCE-ID
        forge-github-repository)    ; CLASS
      forge-alist)
@end lisp

Your company may use hostnames that follow a different format.  You
should be able to easily determine and verify GITHOST and WEBHOST,
but determining APIHOST is more difficult; you might have to ask a
coworker.  APIHOST could be something like @code{api.example.com}, but it
could also be something like @code{example.com/api}.

If the REST API's end point is @code{/v3} and the GraphQL API's end point is
@code{/graphql}, then use something like @code{example.com/v3} as APIHOST@.  This is
a historic accident.  See @uref{https://github.com/magit/forge/issues/174}.

We will use INSTANCE-ID (aka WEBHOST) and APIHOST below.

@anchor{Set your Username (1)}
@subheading Set your Username

Inform Forge about your username for the Github instance in question:

@example
git config --global github.INSTANCE-ID.user USERNAME
@end example

So if INSTANCE-ID is @code{example.com} and USERNAME is @code{tarsius} then use:

@example
git config --global github.example.com.user tarsius
@end example

@anchor{Create and Store an Access Token (1)}
@subheading Create and Store an Access Token

Visit your forge in a browser.  Follow a link to "Settings", from
there to "Developer settings", from there to "Personal access tokens",
and finally to "Tokens (classic)".  On that page generate a new token
using the @code{repo}, @code{user} and @code{read:org} scopes.  Do not close the browser
window just yet, because the token will only be shown once.

The built-in Auth-Source (@ref{Top,,,auth,}) package is used to store the
token generated in the previous step.  The @code{auth-sources} variable
controls how and where Auth-Source keeps its secrets.  The default
value is a list of three files: @code{("~/.authinfo" "~/.authinfo.gpg"
"~/.netrc")}, but that can lead to confusing behavior, so you should
make sure that only one of these files exists, and then you should
also adjust the value of the variable to only ever use that file,
for example:

@lisp
(setq auth-sources '("~/.authinfo"))
@end lisp

In @code{~/.authinfo} secrets are stored in plain text.  If you don't want
that, then you should use the encrypted @code{~/.authinfo.gpg} instead:

@lisp
(setq auth-sources '("~/.authinfo.gpg"))
@end lisp

Make sure you put one of these forms in your init file @strong{and} to evaluate
it in the current Emacs instance as well, by placing the cursor after
the final closing parenthesis and typing @code{C-x C-e} (@code{eval-last-sexp}).

Next add a line like the following to the chosen file:

@example
machine APIHOST login USERNAME^forge password TOKEN
@end example

@itemize
@item
APIHOST must be the same as the second element of the entry we added
to @code{forge-alist}.  In the above example that would be @code{api.example.com}.
Do @strong{not} instead use GITHOST or INSTANCE-ID (aka WEBHOST).

@item
USERNAME must be the same username you used above as the value of
the Git variable.  You @strong{must} append @code{^forge} to that, without any space
in between.

@item
TOKEN is the token you generated earlier.
@end itemize

Finish by typing @code{M-x auth-source-forget-all-cached RET}.  If you don't
do this, then Auth-Source may fail to look up the token.

@node Setup for Gitlabcom
@section Setup for Gitlab.com

@anchor{Set your Username (2)}
@subheading Set your Username

First inform Forge about your @uref{https://gitlab.com} username:

@example
git config --global gitlab.user USERNAME
@end example

If you need to identify as another user in a particular repository,
then you have to set that variable locally:

@example
cd /path/to/repo
git config --local gitlab.user USERNAME
@end example

@anchor{Create and Store an Access Token (2)}
@subheading Create and Store an Access Token

Visit @uref{https://gitlab.com/-/user_settings/personal_access_tokens} in a
browser to generate a new token using the @code{api}, @code{read_api} and @code{read_user}
scopes.  Do not close the browser window just yet, because the token
will only be shown once.

The built-in Auth-Source (@ref{Top,,,auth,}) package is used to store the
token generated in the previous step.  The @code{auth-sources} variable
controls how and where Auth-Source keeps its secrets.  The default
value is a list of three files: @code{("~/.authinfo" "~/.authinfo.gpg"
"~/.netrc")}, but that can lead to confusing behavior, so you should
make sure that only one of these files exists, and then you should
also adjust the value of the variable to only ever use that file,
for example:

@lisp
(setq auth-sources '("~/.authinfo"))
@end lisp

In @code{~/.authinfo} secrets are stored in plain text.  If you don't want
that, then you should use the encrypted @code{~/.authinfo.gpg} instead:

@lisp
(setq auth-sources '("~/.authinfo.gpg"))
@end lisp

Make sure you put one of these forms in your init file @strong{and} to evaluate
it in the current Emacs instance as well, by placing the cursor after
the final closing parenthesis and typing @code{C-x C-e} (@code{eval-last-sexp}).

Next add a line like the following to the chosen file:

@example
machine gitlab.com login USERNAME^forge password TOKEN
@end example

@itemize
@item
The value of @code{machine} should be @code{gitlab.com}.  For historic reasons
@code{gitlab.com} is also supported.

@item
Note that if you instead use the @code{auth-source-pass} backend, then you
@strong{must} use @code{gitlab.com} as @code{host}.

@item
USERNAME must be the same as the value used for the @code{gitlab.user} Git
variable above.  You @strong{must} append @code{^forge} to that, without any space
in between.

@item
TOKEN is the token you generated earlier.
@end itemize

Finish by typing @code{M-x auth-source-forget-all-cached RET}.  If you don't
do this, then Auth-Source may fail to look up the token.

@node Setup for Another Gitlab Instance
@section Setup for Another Gitlab Instance

Before you setup a Gitlab instance that is not @uref{https://gitlab.com},
please first setup the latter.  The setup for @uref{https://gitlab.com} is
easier, and if that works but the setup for the other Gitlab instance
fails, then we can tentatively narrow the issue down to the parts that
differ between @uref{https://gitlab.com} and other instances.

@anchor{Tell Forge about the Instance (1)}
@subheading Tell Forge about the Instance

While Forge knows about @uref{https://gitlab.com} (and a few other well-known
instances) out of the box, for other instances you have to add a new
entry to option @code{forge-alist}.

The entry for @uref{https://gitlab.com} looks like this:

@lisp
("gitlab.com"                       ; GITHOST
 "gitlab.com/api/v4"                ; APIHOST
 "gitlab.com"                       ; WEBHOST and INSTANCE-ID
 forge-gitlab-repository)           ; CLASS
@end lisp

For historic reasons, APIHOST actually has to be a host followed by
a path.

You have to add an entry for your instance.  For example, assuming
your company/organisation uses @uref{https://example.com}, this might be
correct:

@lisp
(push '("example.com"               ; GITHOST
        "example.com/api/v4"        ; APIHOST
        "example.com"               ; WEBHOST and INSTANCE-ID
        forge-gitlab-repository)    ; CLASS
      forge-alist)
@end lisp

Your company may use hostnames that follow a different format.  You
should be able to easily determine and verify GITHOST and WEBHOST,
but determining APIHOST is more difficult; you might have to ask a
colleague.

We will use INSTANCE-ID (aka WEBHOST) and APIHOST below.

@anchor{Set your Username (3)}
@subheading Set your Username

Inform Forge about your username for the Gitlab instance in question:

@example
git config --global gitlab.INSTANCE-ID.user USERNAME
@end example

So if INSTANCE-ID is @code{example.com} and USERNAME is @code{tarsius} then use:

@example
git config --global gitlab.example.com.user tarsius
@end example

@anchor{Create and Store an Access Token (3)}
@subheading Create and Store an Access Token

Visit your forge in a browser.  Follow a link to "Preferences" and
from there to "Access Tokens".  On that page generate a new "Personal
access token" using the @code{api}, @code{read_api} and @code{read_user} scopes.  Do not
close the browser window just yet, because the token will only be
shown once.

The built-in Auth-Source (@ref{Top,,,auth,}) package is used to store the
token generated in the previous step.  The @code{auth-sources} variable
controls how and where Auth-Source keeps its secrets.  The default
value is a list of three files: @code{("~/.authinfo" "~/.authinfo.gpg"
"~/.netrc")}, but that can lead to confusing behavior, so you should
make sure that only one of these files exists, and then you should
also adjust the value of the variable to only ever use that file,
for example:

@lisp
(setq auth-sources '("~/.authinfo"))
@end lisp

In @code{~/.authinfo} secrets are stored in plain text.  If you don't want
that, then you should use the encrypted @code{~/.authinfo.gpg} instead:

@lisp
(setq auth-sources '("~/.authinfo.gpg"))
@end lisp

Make sure you put one of these forms in your init file @strong{and} to evaluate
it in the current Emacs instance as well, by placing the cursor after
the final closing parenthesis and typing @code{C-x C-e} (@code{eval-last-sexp}).

Next add a line like the following to the chosen file:

@example
machine APIHOST login USERNAME^forge password TOKEN
@end example

@itemize
@item
APIHOST must be either the same as the second element of the entry
we added to @code{forge-alist}, or that element with the path suffix
removed.  For example, if the APIHOST, specified in an @code{forge-alist}
entry, is @code{example.com/api/v4}, then you can use @code{example.com/api/v4} or
@code{example.com}.

Historically only the former was supported, but that was a design
mistake, which we are now stuck with, and using just @code{example.com} as
APIHOST in @code{~/.authsource} is now recommended.  For the time being, in
@code{forge-alist} you must still always use @code{example.com/api/v4} as APIHOST@.

If you instead use the @code{auth-source-pass} backend, then you @strong{must} use
@code{example.com} as the value of @code{host}.  Using @code{example.com/api/v4} does not
work with that backend.

@item
USERNAME must be the same username you used above as the value of
the Git variable.  You @strong{must} append @code{^forge} to that, without any space
in between.

@item
TOKEN is the token you generated earlier.
@end itemize

Finish by typing @code{M-x auth-source-forget-all-cached RET}.  If you don't
do this, then Auth-Source may fail to look up the token.

@node Setup a Partially Supported Host
@section Setup a Partially Supported Host

Forge currently only supports the Github and Gitlab APIs.

It does however partially support a few additional forge types (see
@ref{Partially Supported Forges}) and other lighter weight software used
to host Git repositories, which also provide a web interfaces (see
@ref{Supported Semi-Forges}).  Forge doesn't use the APIs of such forges,
but registering the host and adding repositories to the local database
at least enables the use of commands such as @code{forge-browse}.

@anchor{Tell Forge about the Instance (2)}
@subheading Tell Forge about the Instance

A few hosts, which use partially supported forge types, are available
out-of-the-box, because they have an entry in the default value of
option @code{forge-alist} (also see its docstring).  For example, the entry
for @uref{https://codeberg.org} in that variable looks like this:

@lisp
("codeberg.org"                     ; GITHOST
 "codeberg.org/api/v1"              ; APIHOST
 "codeberg.org"                     ; WEBHOST and INSTANCE-ID
 forge-gitea-repository)            ; CLASS
@end lisp

To be able to add repositories from a, so far, unknown forge instance
to your local database, you have to add an entry for that instance to
@code{forge-alist}.  For example, assuming you use another Gitea instance,
hosted at @uref{https://example.com}, this might be correct:

@lisp
(push '("example.com"               ; GITHOST
        "example.com/api/v1"        ; APIHOST
        "example.com"               ; WEBHOST and INSTANCE-ID
        forge-gitea-repository)     ; CLASS
      forge-alist)
@end lisp

Look at @code{forge-alist} entries of other hosts using the same forge type
as the instance you are configuring, to see what format @strong{might} be
appropriate.  You should be able to easily determine and verify
GITHOST and WEBHOST, but determining APIHOST is more difficult; you
might have to ask a colleague.  APIHOST could be something like
@code{example.com/api/vi}, but it could also be something like
@code{api.example.com}.

@anchor{Add Support for Additional Forge Types}
@subheading Add Support for Additional Forge Types

For each fully or partially supported forge type, Forge defines at
least a class.  The following example is taken from @code{forge-semi.el}:

@lisp
(defclass forge-cgit-repository (forge-noapi-repository)
  ((commit-url-format :initform "https://%h/%p.git/commit/?id=%r")
   (branch-url-format :initform "https://%h/%p.git/log/?h=%r")
   (remote-url-format :initform "https://%h/%p.git/about"))
  "Cgit from https://git.zx2c4.com/cgit/about.
Different hosts use different url schemata, so we need multiple
classes.  See their definitions in \"forge-semi.el\".")
@end lisp

Once you add a host using that class to @code{forge-alist} and then a
repository from that host to the local database, you will be able
to use commands such as @code{forge-browse-branch} (but not much more).

If you want to add a repository from another host, which happens to
use another software or another URL schemata, then you might have to
define an additional class first.  See @code{forge-semi.el} for simple
examples and grep for @code{defclass forge-.*-repository} for more complex
ones.

@node Initial Pull
@chapter Initial Pull

To start using Forge in a certain repository, visit the Magit status
buffer for that repository and type @code{N / a} (@code{forge-add-repository}).  You
are given a choice to pull all topics, all topics that were updated
after a certain date, or only individual topics.

Beside adding the repository to the database, this also adds a new
value to the Git variable @code{remote.<remote>.fetch}, which causes all
pull-request refs (@code{+refs/pull/*/head:refs/pullreqs/*} for Github)
to be fetched by Git.

Note that it is possible to use the same command to add any repository
from a supported forge to the database, without cloning the Git
repository first.

The initial fetch can take a while but most of the work is done
asynchronously.  Storing the information in the database is done
synchronously though, so there can be a noticeable hang at the end.
Subsequent fetches are much faster.

Fetching issues from Github is much faster than fetching from other
forges, because making a handful of GraphQL requests, is much faster
than making hundreds of REST requests.

@node Getting Started
@chapter Getting Started

Much like Git stores information in a local repository and does not
require a constant internet connection, Forge retrieves additional
information using a forge's API and stores that in a local database.

Forge's equivalent of @code{git clone} is @code{forge-add-repository}, which has to
be run, before most of Forges features become available in the local
clone of a Git repository.

@table @asis
@item @kbd{N / a} (@code{forge-add-repository})
@kindex N / a
@findex forge-add-repository
This command guides the user through the process of adding a
repository to the local database.

Note that it is possible to add a repository to the local database,
without pulling all the data, which is useful if you just want to
create a single issue or pull-request in a repository, but are not
interested in existing topics, e.g., because you do not regularly
contribute to that repository.

Also note that you can add a repository to the local database, even
if no local Git clone exists.
@end table

Like with Git, you have to explicitly pull remote changes, at your
leisure, using @code{forge-pull}.

@table @asis
@item @kbd{f n} (@code{forge-pull})
@itemx @kbd{N f f}
@kindex f n
@kindex N f f
@findex forge-pull
This command uses a forge's API to fetch topics and other
information about the current repository, and stores the fetched
information in the database.

If the current repository isn't being tracked in the local database
yet, then this command pivots to behave like @code{forge-add-repository}.
@end table

Forge adds two additional sections to Magit's status buffer, which
list open and/or pending issues and pull-requests.  Typing @code{RET}, while
the cursor is on a topic section, shows more information about that
topic in a separate buffer.  Typing @code{RET} on a topic list section, shows
that list in a separate buffer, where you can apply different filters.

The other main entry point to the functionality provided by Forge is
the @code{forge-dispatch} menu.

@table @asis
@item @kbd{N} (@code{forge-dispatch})
@kindex N
@findex forge-dispatch
This prefix command is available in all Magit buffers and provides
access to most of the available Forge commands.  See the following
sections for information about the available commands.
@end table

@node Lists and Menus
@chapter Lists and Menus

Topics are listed in two sections in Magit's status buffer, but can
also be listed in dedicated buffers.  Likewise individual topics can
be visited in separate buffers.  In both cases this can be done by
placing the cursor on the respective section in the status buffer and
typing @code{RET}, or by invoking the appropriate command from Forge's main
menu, on @code{N} (@code{forge-dispatch}).

List commands and corresponding menu commands exist for topics,
notifications and repositories, but there isn't always an exclusive
mapping from menu to buffer.  The main menu (@code{forge-dispatch}), the
configuration menu (@code{forge-configure}), the menu which controls the
current topic or the topic at point (@code{forge-topic-menu}), and the
menu which controls the topics listed in the current buffer
(@code{forge-topics-menu}), are useful in more than one major mode.

All of these menus feature bindings to directly switch to the other
appropriate menus.  So it is enough to remember that @code{N} always brings
up the dispatch menu; you can always navigate to another menu from
there.

@code{C-c C-c} brings up the most appropriate menu for the current buffer.
In Magit's status buffer the most appropriate menu is Magit's own
dispatch menu (@code{magit-dispatch}), so here the quickest way to invoke
Forge's dispatch menu is @code{N}.  Even in Magit's status buffer, when the
cursor is an individual topic or on a topic list section, @code{C-c C-c}
opens the respective menu (@code{forge-topics-menu} or @code{forge-topic-menu}).

The following sections describe most of the available menu and list
commands.  For @code{forge-topic-menu}, see @ref{Editing Topics}.

@anchor{Dispatch and configuration menus}
@heading Dispatch and configuration menus

@table @asis
@item @kbd{N} (@code{forge-dispatch})
@kindex N
@findex forge-dispatch
This prefix menu command is available in all Magit buffers and
provides access to most of the available Forge commands.  See the
following sections for information about the available commands.

@item @kbd{N m c} (@code{forge-configure})
@kindex N m c
@findex forge-configure
This command displays a menu used to configure the current
repository and some global settings as well.
@end table

@anchor{Topic menu and list commands}
@heading Topic menu and list commands

@table @asis
@item @kbd{N m f} (@code{forge-topics-menu})
@itemx @kbd{C-c C-c [in topics list buffer/section]}
@kindex N m f
@kindex C-c C-c [in topics list buffer/section]
@findex forge-topics-menu
This command displays a menu used to control the list of topics
displayed in the current buffer.

Note that this command can not only be used in buffers dedicated
to listing topics, but also in Magit's status buffer.

@item @kbd{N l t} (@code{forge-list-topics})
@kindex N l t
@findex forge-list-topics
This command lists the current repository's issues in a separate
buffer.  If the list buffer already exists, this command only
ensures that all types of topics are listed.  If any other filters
are in effect, they are left intact.

@item @kbd{@key{RET} [on "Issues" status section]} (@code{forge-list-issues})
@kindex RET [on "Issues" status section]
@findex forge-list-issues
This command lists the current repository's issues in a separate
buffer.  If the list buffer already exists, this command limits the
list to issues.  If any other filters are in effect, they are left
intact.

@item @kbd{@key{RET} [on "Pull requests" status section]} (@code{forge-list-pullreqs})
@kindex RET [on "Pull requests" status section]
@findex forge-list-pullreqs
This command lists the current repository's pull-requests in a
separate buffer.  If the list buffer already exists, this command
limits the list to pull-requests.  If any other filters are in
effect, they are left intact.

@item @kbd{N l g} (@code{forge-list-global-topics})
@kindex N l g
@findex forge-list-global-topics
This command lists topics across all tracked repository.  If the
list buffer already exists, filters except for the type filter are
left in effect.
@end table

@deffn Command forge-list-global-issues
This command lists issues across all tracked repository.  If the
list buffer already exists, filters except for the type filter are
left in effect.
@end deffn

@deffn Command forge-list-global-pullreqs
This command lists pull-requests across all tracked repository.  If
the list buffer already exists, filters except for the type filter
are in effect.
@end deffn

@anchor{Notification menu and list commands}
@heading Notification menu and list commands

@table @asis
@item @kbd{N m n} (@code{forge-notifications-menu})
@itemx @kbd{C-c C-c [in notifications list buffer]}
@kindex N m n
@kindex C-c C-c [in notifications list buffer]
@findex forge-notifications-menu
This command displays a menu used to control the list of
notifications displayed in the current buffer.

@item @kbd{N l n} (@code{forge-list-notifications})
@kindex N l n
@findex forge-list-notifications
This command lists all notifications for all forges in a separate
buffer.
@end table

@anchor{Repository menu and list commands}
@heading Repository menu and list commands

@table @asis
@item @kbd{N m r} (@code{forge-repositories-menu})
@itemx @kbd{C-c C-c [in repositories list buffer]}
@kindex N m r
@kindex C-c C-c [in repositories list buffer]
@findex forge-repositories-menu
This command displays a menu used to control the list of
repositories displayed in the current buffer.

@item @kbd{N l r} (@code{forge-list-repositories})
@kindex N l r
@findex forge-list-repositories
This command lists all known repositories in a separate buffer.
Here "known" means that an entry exists in the local database.

@item @kbd{@key{RET} [on repository]} (@code{forge-visit-this-repository})
@kindex RET [on repository]
@findex forge-visit-this-repository
This commands visits the repository at point in a separate buffer.

@item @kbd{o [in forge-repositories-menu]} (@code{forge-list-owned-repositories})
@kindex o [in forge-repositories-menu]
@findex forge-list-owned-repositories
This command lists all known repositories that belong to the user in
a separate buffer.  Here "known" means that an entry exists in the
local database.  Only Github is supported for now.
@end table

The below options controls which repositories are considered to be
owned by the user.  They are additionally used by @code{forge-fork}.

@defopt forge-owned-accounts
This is an alist of accounts that are owned by you.  This should
include your username as well as any organization that you own.

Each element has the form @code{(ACCOUNT . PLIST)}.  The following
properties are currently being used:

@itemize
@item
@code{remote-name} The default name suggested by @code{forge-fork} for a fork
created within this account.  If unspecified, then the name of the
account is used.
@end itemize

Example: @code{(("tarsius") ("emacsmirror" remote-name "mirror"))}.
@end defopt

@defopt forge-owned-ignored
This is a list of repository names that are considered to not be
owned by you, even though they would have been considered to be
owned by you based on @code{forge-owned-accounts}.
@end defopt

@anchor{Exiting menus and lists}
@heading Exiting menus and lists

To exit a menu, type @code{C-g}.  If the menu was invoked from another menu
and that menu is useful in the current buffer, then that menu becomes
active again.  If that happens and you actually want to quit all
menus, then just type @code{C-g} again.  You can also directly exit all menus
by using @code{C-q}, instead of @code{C-g}.

Type @code{q} to quit not only the menu, but also the list or topic detail
buffer.  That binding is also available when no menu is active, in
which case it will simply quit the buffer.  When invoked from a menu,
then this binding may return to another list buffer, in which case
some menu may also remain active.

@anchor{Default topic filters}
@heading Default topic filters

@defopt forge-list-buffer-default-topic-filters
This option specifies the filters initially used to limit topics
listed in topic list buffers.
@end defopt

@defopt forge-status-buffer-default-topic-filters
This option specifies the filters initially used to limit topics
listed in Magit status buffers.

Also see @ref{Topic sections in Magit status buffers}.
@end defopt

@anchor{Topic sections in Magit status buffers}
@heading Topic sections in Magit status buffers

Forge arranges for certain issues and pull-requests to be list in
Magit status buffers, by adding the following functions to
@code{magit-status-sections-hook}.

Which topics are listed initially is customizable using option
@code{forge-status-buffer-default-topic-filters} and can be changed
temporarily for the current buffer, using @code{N m f} (@code{forge-topics-menu}).

@defun forge-insert-discussions
This function inserts a list of discussions, by default a list of
"active" discussions.
@end defun

@defun forge-insert-issues
This function inserts a list of issues, by default a list of "active"
issues.
@end defun

@defun forge-insert-pullreqs
This function inserts a list of pull-requests, by default a list of
"active" pull-requests.
@end defun

Forge used to provide additional functions to insert hard-coded topic
subsets, but they were removed in favor of the more flexible approach
described above.  If you miss the removed sections, you can use the
new @code{forge-insert-topics} helper function to define your own section
inserter functions.  See its docstring for more information.

If you don't want any topic list sections to be displayed in Magit
status buffers, set @code{forge-add-default-sections} to @code{nil} before @code{magit} is
loaded.

@node Visiting Topics
@chapter Visiting Topics

The commands, accessible from @code{forge-topic-menu} (on @code{C-return}), act on
the topic at point; so this menu is useful in buffers dedicated to
listing topics and notifications (which correspond to topics), but
also in the status buffer (which also lists topics).  In buffers
dedicated to showing details about a single topic, these commands act
on that topic; so this menu can be used there too.

To switch to this menu from another menu use @code{m s}.  If the cursor is on
a topic or the current buffer visits a topic.

To display details about a topic in a separate buffer and at the same
time display the topic menu, invoke @code{forge-topic-menu} with a prefix
argument, i.e., @code{C-u RET}.

@table @asis
@item @kbd{@key{RET} [on topic]} (@code{forge-visit-this-topic})
@kindex RET [on topic]
@findex forge-visit-this-topic
This commands visits the topic at point in a separate buffer.
When invoked with a prefix argument then it not only visits the
topic in a separate buffer, it at the same time displays

@item @kbd{N v t} (@code{forge-visit-topic})
@itemx @kbd{N v i} (@code{forge-visit-issue})
@itemx @kbd{N v p} (@code{forge-visit-pullreq})
@kindex N v t
@kindex N v i
@kindex N v p
@findex forge-visit-topic
@findex forge-visit-issue
@findex forge-visit-pullreq
These commands read a topic, issue or pull-request and visit it in a
separate buffer.

@item @kbd{N v u} (@code{forge-visit-topic-from-url})
@kindex N v u
@findex forge-visit-topic-from-url
This commands reads an URL and visits the corresponding topic.
Normally users would yank that URL into the minibuffer, after
having copied it from an email or a browser's address bar.

This command is disabled in the menu by default.

@item @kbd{C-c C-o} (@code{forge-browse})
@itemx @kbd{o [on topic in topic list]} (@code{forge-browse-this-topic})
@itemx @kbd{o [on repository in repository list]} (@code{forge-browse-this-repository})
@kindex C-c C-o
@kindex o [on topic in topic list]
@kindex o [on repository in repository list]
@findex forge-browse
@findex forge-browse-this-topic
@findex forge-browse-this-repository
These commands visit the topic, issue(s), pull-request(s), post,
branch, commit, remote, repository or blob at point in a browser.
@end table

@deffn Command forge-browse-commit
@end deffn
@deffn Command forge-browse-branch
@end deffn
@deffn Command forge-browse-repository
@end deffn
@table @asis
@item @kbd{N b t} (@code{forge-browse-topic})
@itemx @kbd{N b i} (@code{forge-browse-issue})
@itemx @kbd{N b p} (@code{forge-browse-pullreq})
@itemx @kbd{N b r} (@code{forge-browse-remote})
@itemx @kbd{N b I} (@code{forge-browse-issues})
@itemx @kbd{N b P} (@code{forge-browse-pullreqs})
@kindex N b t
@kindex N b i
@kindex N b p
@kindex N b r
@kindex N b I
@kindex N b P
@findex forge-browse-topic
@findex forge-browse-issue
@findex forge-browse-pullreq
@findex forge-browse-remote
@findex forge-browse-issues
@findex forge-browse-pullreqs
These commands read a topic, issue(s), pull-request(s), branch,
commit, remote or repository, and open it in a browser.
@end table

@deffn Command forge-browse-commit
This command visit a blob in a browser.

When invoked from a blob- or file-visiting buffer, visit that blob
without prompting.  If the region is active, try to jump to the marked
line or lines, and highlight them in the browser.  To what extend that
is possible depends on the forge.  When the region is not active just
visit the blob, without trying to jump to the current line.  When
jumping to a line, always use a commit hash as part of the URL@.  From
a file in the worktree with no active region, instead use the branch
name as part of the URL, unless a prefix argument is used.

When invoked from a Dired buffer, visit the blob at point without
prompting.  If a prefix argument is used, the commit hash is
included in the URL@.

When invoked from any other buffer, prompt the user for a branch or
commit, and for a file.
@end deffn

@node Creating Topics and Posts
@chapter Creating Topics and Posts

We call both issues and pull-requests "topics".  The contributions to
the conversation are called "posts".  The initial topic description is
also called a post.

Creating a new topic or post and editing an existing post work
similarly to now creating a new commit or editing the message of an
existing commit works in Magit.  In both cases the message has to be
written in a separate buffer and then the process has to be finished
or canceled using a separate command.  The following commands drop you
into such a buffer.

@table @asis
@item @kbd{N c p} (@code{forge-create-pullreq})
@itemx @kbd{C-c C-n [on "Pull requests" section]}
@kindex N c p
@kindex C-c C-n [on "Pull requests" section]
@findex forge-create-pullreq
This command creates a new pull-request for the current repository.

@item @kbd{N c i} (@code{forge-create-issue})
@itemx @kbd{C-c C-n [on "Issues" section]}
@kindex N c i
@kindex C-c C-n [on "Issues" section]
@findex forge-create-issue
This command creates a new issue for the current repository.

@item @kbd{C-c C-n} (@code{forge-create-post})
@itemx @kbd{C-c C-r}
@kindex C-c C-n
@kindex C-c C-r
@findex forge-create-post
This command creates a new post on an existing topic.  It is only
available in buffers that visit an existing topic.

If the region is active and marks part of an existing post, then
that part of the post is quoted.  When a prefix argument is used,
then the complete post, which point is currently on, is quoted.
@end table

The following commands are available in buffers used to edit posts:

@table @asis
@item @kbd{C-c C-c} (@code{forge-post-submit})
@kindex C-c C-c
@findex forge-post-submit
This command submits the post that is being edited in the current
buffer.

@item @kbd{C-c C-k} (@code{forge-post-cancel})
@kindex C-c C-k
@findex forge-post-cancel
This command cancels the post that is being edited in the current
buffer.

@item @kbd{C-c C-e} (@code{forge-post-dispatch})
@kindex C-c C-e
@findex forge-post-dispatch
This prefix command features the above two commands as suffixes,
and when creating a pull-request also the following command.  More
suffix commands will likely be added in the future.

@item @kbd{C-c C-e d} (@code{forge-post-toggle-draft})
@kindex C-c C-e d
@findex forge-post-toggle-draft
This command toggles whether the pull-request being created is a
draft.
@end table

@node Editing Topics
@chapter Editing Topics

Many details about a topic can be changed from the buffer that visits
that topic, but also from topic lists, if the cursor is placed on the
topic to be edited.  However, to edit the posts on a topic, the topic
has to be visited in its own buffer.

@table @asis
@item @kbd{C-c C-e [on a post section]} (@code{forge-edit-post})
@kindex C-c C-e [on a post section]
@findex forge-edit-post
This command visits an existing post in a separate buffer, it can
only be invoked from a topic buffer, when the cursor is on the post
to be edited.

Editing an existing post is similar to creating a new post, as
described in the previous section.

@item @kbd{C-c C-k [on a post section]} (@code{forge-delete-comment})
@kindex C-c C-k [on a post section]
@findex forge-delete-comment
This command deletes the post the cursor is on.  The initial message
that was written when the topic was created, cannot be deleted, only
replies to that.

@item @kbd{N m s} (@code{forge-topic-menu})
@itemx @kbd{C-<return> [on a topic section]}
@kindex N m s
@kindex C-<return> [on a topic section]
@findex forge-topic-menu
This command displays a menu used to edit details about the topic
the cursor is on or that is being visited in the current buffer.
E.g., it can be used to change the status of the topic or to apply
labels to it.  Additionally it features a few commands that act on
that topic.

With a prefix argument, this additionally visits the topic.
@end table

Details about a topic, such as its status and labels, can
alternatively be edited by visiting the topic in its own buffer,
navigating to the header that displays the detail and then typing @code{C-c
C-e}.  This older approach is still available, but it is usually much
faster to use the menu.

@node Pulling
@chapter Pulling

The commands that fetch forge data are available the Forge's main menu
(@code{forge-dispatch} on @code{N}) and from the same menu (@code{magit-fetch} on @code{f}) that
is used to fetch Git data.  If @code{magit-pull-or-fetch} is non-@code{nil}, then
they are also available from the @code{magit-pull} menu (on @code{F}).

With Git you have to explicitly pull Git data to make it available in
the local repository.  Forge works the same; you have to explicitly
pull to pull data using the forge's API and storing in the local
database.  This is less disruptive, more reliable, familiar and easier
to understand than if Forge pulled by itself at random intervals.  It
might however mean that you occasionally invoke a command expecting
the most recent data to be available and then have to abort and pull
first.  The same can happen with Git, e.g., you might attempt to merge
a branch that you know exists but haven't actually pulled yet.

@table @asis
@item @kbd{f n} (@code{forge-pull})
@itemx @kbd{N f f}
@kindex f n
@kindex N f f
@findex forge-pull
This command uses a forge's API to fetch topics and other
information about the current repository and stores the fetched
information in the database.

If the current repository is still untracked locally, or the current
repository cannot be determined, this command instead behaves like
@code{forge-add-repository}, i.e., it adds the repository to the database
and then performs the initial pull.

@item @kbd{f N} (@code{forge-pull-notifications})
@itemx @kbd{N f n}
@kindex f N
@kindex N f n
@findex forge-pull-notifications
This command uses a forge's API to fetch all notifications from that
forge, including, but not limited to, the notifications for the
current repository.

Fetching notifications fetches associated topics even for repositories
that you have not yet explicitly added to the local database.

@item @kbd{N f t} (@code{forge-pull-topic})
@kindex N f t
@findex forge-pull-topic
This command uses a forge's API to fetch a single pull-request and
stores it in the database.  This is useful if you chose to not fetch
all topics when you added the repository using @code{forge-add-repository}.
@end table

@node Branching
@chapter Branching

Forge provides commands for creating and checking out a new branch or
work tree from a pull-request.  These commands are available from the
same transient prefix commands as the suffix commands, used to create
and check out branches and work trees in a more generic fashion
(@code{magit-branch} on @code{b} and @code{magit-worktree} on @code{%}).

@table @asis
@item @kbd{b F} (@code{forge-branch-pullreq})
@kindex b F
@findex forge-branch-pullreq
This command creates and configures a new branch from a pull-request,
creating and configuring a new remote if necessary.

The name of the local branch is the same as the name of the remote
branch that you are being asked to merge, unless the contributor
could not be bothered to properly name the branch before opening the
pull-request.  The most likely such case is when you are being asked
to merge something like "fork/master" into "origin/master".  In such
cases the local branch will be named "pr-N", where @code{N} is the
pull-request number.

These variables are always set by this command:

@itemize
@item
@code{branch.<name>.pullRequest} is set to the pull-request number.
@item
@code{branch.<name>.pullRequestRemote} is set to the remote on which the
pull-request branch is located.
@item
@code{branch.<name>.pushRemote} is set to the same remote as
@code{branch.<name>.pullRequestRemote} if that is possible, otherwise
it is set to the upstream remote.
@item
@code{branch.<name>.description} is set to the pull-request title.
@item
@code{branch.<name>.rebase} is set to @code{true} because there should be no
merge commits among the commits in a pull-request.
@end itemize

This command also configures the upstream and the push-remote of the
local branch that it creates.

The branch against which the pull-request was opened is always used
as the upstream.  This makes it easy to see what commits you are
being asked to merge in the section titled something like "Unmerged
into origin/master".

Like for other commands that create a branch, it depends on the
option @code{magit-branch-prefer-remote-upstream} whether the remote branch
itself or the respective local branch is used as the upstream, so
this section may also be titled, e.g., "Unmerged into master".

When necessary and possible, the remote pull-request branch is
configured to be used as the push-target.  This makes it easy to see
what further changes the contributor has made since you last
reviewed their changes in the section titled something like
"Unpulled from origin/new-feature" or "Unpulled from
fork/new-feature".

@itemize
@item
If the pull-request branch is located in the upstream repository,
then you probably have set @code{remote.pushDefault} to that repository.
However some users like to set that variable to their personal
fork, even if they have push access to the upstream, so
@code{branch.<name>.pushRemote} is set anyway.

@item
The push-remote is configured using @code{branch.<name>.pushRemote}, even
if the used value is identical to that of @code{remote.pushDefault}, just
in case you change the value of the latter later on.  Additionally
the variable @code{branch.<name>.pullRequestRemote} is set to the remote
on which the pull-request branch is located.

@item
If the pull-request branch is located on the contributor's fork,
then you, as a maintainer of the upstream repository, are usually
allowed to push to that branch anyway.  (However, the contributor
could explicitly disallow this, but in my experience that rarely
happens.)

@item
As mentioned above, contributors sometimes fail to use a dedicated
branch for their pull-requests and this command is thus forced to
make up a branch name such as "pr-313".

Usually a maintainer would use @code{magit-push-current-to-pushremote}
(on @code{p}) to push to the contributor's pull-request branch on their
fork.  For a branch named "pr-313" that does not work. (Instead
of pushing to "fork/main", it would unsuccessfully attempt to
create a new branch "pr-313" on the fork.)  In such situations
the @code{magit-push} menu offers an alternative command for pushing to
the pull-request branch: @code{forge-push-to-unnamed-pullreq} (on @code{N}).
@end itemize

@item @kbd{b f} (@code{forge-checkout-pullreq})
@kindex b f
@findex forge-checkout-pullreq
This command creates and configures a new branch from a pull-request
the same way @code{forge-branch-pullreq} does.  Additionally it checks out
the new branch.

@item @kbd{Z n} (@code{forge-checkout-worktree})
@kindex Z n
@findex forge-checkout-worktree
This command creates and configures a new branch from a pull-request
the same way @code{forge-branch-pullreq} does.  Additionally it checks out
the new branch, using a new working tree.
@end table

@defopt forge-checkout-worktree-read-directory-function
This function is used by @code{forge-checkout-worktree}, to read the new
worktree directory where it checks out the pull-request.  It takes
the pull-request as the only argument and must return a directory.
@end defopt

When you delete a pull-request branch, which was created using one of
the above three commands, then @code{magit-branch-delete} usually offers to
also delete the corresponding remote.  It does not offer to delete a
remote if (1) the remote is the upstream remote, and/or (2) if other
branches are being fetched from the remote.

Note that you have to delete the local branch (e.g., "feature") for
this to work.  If you delete the tracking branch (e.g., "fork/feature"),
then the remote is never removed.

@node Miscellaneous Commands
@chapter Miscellaneous Commands

@table @asis
@item @kbd{N M} (@code{forge-merge})
@itemx @kbd{m M [if enabled]}
@kindex N M
@kindex m M [if enabled]
@findex forge-merge
This command merges the current pull-request using the forge's API@.
If there is no current pull-request or with a prefix argument, then
it reads a pull-request to visit instead.

The "merge method" to be used is read from the user.

Use of this command is discouraged.  Unless the remote repository is
configured to disallow that, you should instead merge locally and
then push the target branch.  Forges detect that you have done that
and respond by automatically marking the pull-request as merged.

@item @kbd{N c f} (@code{forge-fork})
@kindex N c f
@findex forge-fork
This command adds an additional remote to the current repository.
The remote can either point at an existing repository or one that
has to be created first by forking it to an account the user has
access to.

Currently this only supports Github and Gitlab.

With a prefix argument, fork all branches, not just the default
branch.  On Gitlab it is not possible to fork only the default.

@item @kbd{N - H} (@code{forge-toggle-topic-legend})
@kindex N - H
@findex forge-toggle-topic-legend
This command toggle whether to show a legend for faces used in topic
menus and lists.

@item @kbd{N - S} (@code{forge-toggle-display-in-status-buffer})
@kindex N - S
@findex forge-toggle-display-in-status-buffer
This command toggles whether any topics are displayed in the current
Magit status buffer.

@item @kbd{C-c C-w} (@code{forge-copy-url-at-point-as-kill})
@kindex C-c C-w
@findex forge-copy-url-at-point-as-kill
This command copies the url for the topic, issue(s),
pull-request(s), post, branch, commit, remote or repository to the
kill-ring.

This determines the url the same way as @code{forge-browse} does, but then
adds it to the kill-ring, instead of visiting it in a browser.

@item @kbd{M b r} (@code{forge-rename-default-branch})
@kindex M b r
@findex forge-rename-default-branch
This command rename the default branch to a new name read from the
user.

This changes the name on the upstream remotely and locally, and
update the upstream remotes of local branches accordingly.
@end table

@deffn Command forge-add-pullreq-refspec
This command configures Git to fetch all pull-requests.

This is done by adding @code{+refs/pull/*/head:refs/pullreqs/*} to the
value of @code{remote.REMOTE.fetch}, where REMOTE is the upstream remote.
@end deffn

@deffn Command forge-add-user-repositories
This command reads a host and a username from the user and adds all
of that user's repositories on that host to the local database.

This may take a while. Only Github is supported at the moment.
@end deffn

@deffn Command forge-add-organization-repositories
This command reads a host and an organization from the user and adds
all the organization's repositories on that host to the local database.

This may take a while. Only Github is supported at the moment.
@end deffn

@deffn Command forge-remove-repository
This command reads a repository and removes it from the local
database.
@end deffn

@deffn Command forge-remove-topic-locally
This command reads a topic and removes it from the local database.
When the region marks multiple topics, then offer to remove them all.

The topic is not removed from the forge and, if it is later modified,
then it will be added to the database again when fetching all topics.

This is useful for users who only fetch individual topics and want to
remove the topics they are no longer interested in.  This can also be
used to remove topics locally, which have already been removed on the
forge (the service).  Forge (the package) cannot automatically detect
when that happens, because given how the APIs work, this would be too
expensive.
@end deffn

@deffn Command forge-reset-database
This command moves the current database file to the trash and
creates a new empty database.

This is useful after the database's table schemata have changed,
which will happen a few times while the Forge functionality is still
under heavy development.
@end deffn

@node Miscellaneous Options
@chapter Miscellaneous Options

@defopt forge-database-file
This option specifies the file used to store the forge database.
@end defopt

@defopt forge-topic-wash-title-hook
Functions used to highlight parts of each individual topic title.

These functions are called in order, in a buffer that containing the
topic title.  They should set text properties as they see fit, usually
just @code{font-lock-face}.  Before each function is called, point is at the
beginning of the buffer.
@end defopt

@defopt forge-topic-repository-slug-width
This option specifies the width of repository slugs (i.e.,
"OWNER/NAME").
@end defopt

@defopt forge-buffer-draft-p
This option controls whether new pull-requests start out as drafts
by default.

The buffer-local value of this variable is used to keep track of the
draft status of the current pull-request.
@end defopt

@defopt forge-repository-list-columns
This option specifies the list of columns displayed when listing
repositories.

Each element has the form @code{(HEADER SOURCE WIDTH SORT PROPS)}.

HEADER is the string displayed in the header.  WIDTH is the width
of the column.  SOURCE is used to get the value, it has to be the
name of a slot of @code{forge-repository} or a function that takes
such an object as argument.  SORT is a boolean or a function used
to sort by this column.  Supported PROPS include @code{:right-align}
and @code{:pad-right}.
@end defopt

@defopt forge-limit-topic-choices
This option controls whether to initially limit completion
candidates to active topics.
@end defopt

@defopt forge-post-heading-format
This option specifies the format for post headings in topic view.

The following @code{%}-sequences are supported:

@itemize
@item
@code{%a} The forge nickname of the author.
@item
@code{%c} The absolute creation date.
@item
@code{%C} The relative creation date.
@end itemize
@end defopt

@defopt forge-post-fill-region
This option controls whether to call @code{fill-region} before displaying
forge posts.
@end defopt

@defopt forge-bug-reference-hooks
This option lists the hooks to which @code{forge-bug-reference-setup} is
added.  It has to be customized before @code{forge} is loaded, or it won't
take effect.
@end defopt

@node How Forge Detection Works
@appendix How Forge Detection Works

Forge uses the Ghub package to communicate with forge APIs.  For more
information about Ghub, see @ref{Top,,,ghub,}.

Ghub does @strong{not} associate a given local repository with a repository on
a forge.  The Forge package itself takes care of this.  In doing so it
ignores the Git variable @code{ghub.host} and other @code{*.host} variables used by
Ghub.  (But @code{github.user}, and other variables used to specify the user,
are honored).

Forge associates the local repository with a forge repository, by first
determining which remote is associated with the upstream repository,
and then looking that up in @code{forge-alist}.

If only one remote exists, then Forge uses that unconditionally.  To
reduce the number of support requests, this is even the case if the
Git variable @code{forge.remote} names another, non-existent, remote.

If several remotes exist, then a remote may be selected based on its
name.  Almost always we want to fetch the data associated with the
upstream repository, so that is what the logic described here tries to
achieve.  The convention is to name the upstream remote "origin", and
if that convention were universally followed, then things would be
trivial.  However many people name the upstream remote "upstream",
which also makes sense.

@quotation
Note, however, that even though a surprising number of people do just
that, it does not make any sense to use the name "origin" to refer to
a fork; not even to your own fork.  A fork is a @strong{copy} of the original,
"copy" is an antonym for "original", and the word "origin" is not only
closely related to but is even contained in the word "original".
Naming a fork the "origin" is at best extremely confusing.

@table @asis
@item copy
a thing made to be similar or identical to another.

@item original
the earliest form of something, from which copies may be
made.

@item origin
the point or place where something begins, arises, or is
derived.
@end table

@end quotation

If several remotes exist, then the following remote names are tried in
order and the first remote thus named that exists in the repository is
used.

@enumerate
@item
The value of the Git variable @code{forge.remote}, if set.  If the
variable has a value but no remote by the specified name exists,
then a warning is shown, but otherwise this conflict is ignored.
This behavior is arguably odd, but due to historic and pragmatic
reasons it is the least painful path forward.

@item
The remote named @code{upstream}, if it exists.

@item
The remote named @code{origin}, if it exists.
@end enumerate

The remote named "upstream" is preferred over the remote named
"origin" because the existence of the former strongly suggests that
the latter is either not used in this repository (in which case the
order does not matter) or else it is abused as the name of a fork (in
which case "upstream" must be preferred).

@defvar forge.remote
The value of this variable specifies the remote from which Forge
fetches data.  It is usually best to leave this unspecified and to
rely on the behavior described above.

If the remote has to be specified explicitly, then this should be
done locally, for a single repository.

Only ever set this globally, if you consistently use a certain name
to refer to the upstream repository and it isn't one of "upstream"
or "origin", and you @strong{never} use that name to refer to a repository
that does @strong{not} refer to the upstream repository.
@end defvar

@table @asis
@item @kbd{N r} (@code{forge-forge.remote})
@kindex N r
@findex forge-forge.remote
This command changes the value of the @code{forge.remote} Git variable in
the current repository.
@end table

If this variable is set, then Forge uses the remote by that name, if
it exists, the same way it may have used @code{origin} if the variable were
undefined.  I.e., it does not fall through to try @code{origin} if no remote
by your chosen name exists.

Once the upstream remote has been determined, Forge looks it up in
@code{forge-alist}, using the host part of the URL as the key.  For example,
the key for @code{git@@github.com:magit/forge.git} is @code{github.com}.

@defopt forge-alist
This option defines forge hosts known to Forge.

Each entry has the form @code{(GITHOST APIHOST WEBHOST CLASS)}.

@itemize
@item
GITHOST is the host used to access repositories on the forge using
Git.

@item
APIHOST is the host used to access the forge's API@.  For some forges
the isn't just a host, but a host followed by the path to the API's
endpoint.

@item
WEBHOST is the host used to access repositories on this forge using
a browser.  The IDs used to identify repositories from the forge in
the local database also derives from this value.

@item
CLASS is the class to be used for repositories from the forge.
@end itemize

Complications:

@itemize
@item
When connecting to a Github Enterprise edition whose REST API's
end point is "<host>/v3" and whose GraphQL API's end point is
"<host>/graphql", then use "<host>/v3" as APIHOST@.  This is
a historic accident.  See issue #174.

@item
WEBHOST and CLASS cannot be changed once you have added one or
more repositories from a forge.  Changing GITHOST and/or APIHOST
may be possible, but should seldom be necessary.
@end itemize
@end defopt

@node Supported Forges and Hosts
@appendix Supported Forges and Hosts

Currently Forge supports two forges and three more forges partially.
Additionally it supports four semi-forges.  Support for more forges
and semi-forges can and will be added.

Both forges and semi-forges provide web interfaces for Git
repositories.  Forges additionally support pull-requests and issues
and make those and other information available using an API@.

When a forge is only partially supported, then that means that only
the functionality that does not require the API is implemented, or
in other words, that the forge is only supported as a semi-forge.

A host is a particular instance of a forge.  For example the hosts
@uref{https://gitlab.com} and @uref{https://salsa.debian.org} are both instances of
the Gitlab forge.  Forge supports some well known hosts out of the box
and additional hosts can easily be supported by adding entries to the
option @code{forge-alist} (see @ref{How Forge Detection Works}).

For more details about the caveats mentioned below (and some others)
see also @ref{Getting Started}.

@menu
* Supported Forges::
* Partially Supported Forges::
* Supported Semi-Forges::
@end menu

@node Supported Forges
@appendixsec Supported Forges

@anchor{Github}
@appendixsubsec Github

Forge's support for Github can be considered the "reference
implementation".  Support for other forges can lag behind a bit.

@anchor{Github Caveats}
@appendixsubsubsec Github Caveats

@itemize
@item
Forge uses the Github GraphQL API when possible but has to fall
back to use the REST API in many cases because the former is still
rather incomplete.

@item
The Github GraphQL API has a hard-coded timeout on queries. The only solution
is to reduce the number of entities we query at once, which can be done by
adjusting either the @code{forge.graphqlItemLimit} git variable or the field "GQL
entity limit" in a status buffer.

@item
Forge depends on the @code{updated_at} field being updated when
appropriate.  For Github pull-requests at least, that is not always
done.
@end itemize

@anchor{Github Hosts}
@appendixsubsubsec Github Hosts

@itemize
@item
@uref{https://github.com}
@end itemize

@anchor{Gitlab}
@appendixsubsec Gitlab

@anchor{Gitlab Caveats}
@appendixsubsubsec Gitlab Caveats

@itemize
@item
Forge cannot provide notifications because the Gitlab API does not
expose those.
@end itemize

@anchor{Gitlab Hosts}
@appendixsubsubsec Gitlab Hosts

@itemize
@item
@uref{https://gitlab.com}
@item
@uref{https://salsa.debian.org}
@item
@uref{https://framagit.org}
@end itemize

@node Partially Supported Forges
@appendixsec Partially Supported Forges

@anchor{Forgejo https//forgejoorg}
@appendixsubsec Forgejo https://forgejo.org

This is the next forge whose API will be supported.

@anchor{Forgejo Hosts}
@appendixsubsubsec Forgejo Hosts

@itemize
@item
@uref{https://codeberg.org}
@end itemize

@anchor{Gitea https//giteaio}
@appendixsubsec Gitea https://gitea.io

Once Forgejo is supported it might be fairly simple to support Gitea
too, because the former is a fork of the latter, and their APIs might
still be similar enough.

@anchor{Gogs https//gogsio}
@appendixsubsec Gogs https://gogs.io

Once Forgejo is supported it might be fairly simple to support Gogs
too, because the Forgejo is a fork of Gitea, which is a fork of Gogs,
and their APIs might still be similar enough.

@anchor{Bitbucket https//bitbucketorg}
@appendixsubsec Bitbucket https://bitbucket.org

I don't plan to support Bitbucket's API any time soon, and it gets
less likely that I will every do it every time I look at it.

@anchor{Bitbucket Caveats}
@appendixsubsubsec Bitbucket Caveats

@itemize
@item
The API documentation is poor and initial tests indicated that the
implementation is buggy.

@item
Atlassian's offering contains two very distinct implementations
that are both called "Bitbucket".  Forge only supports the
implementation whose only instance is available at
@uref{https://bitbucket.org}, because I only have access to that.

@item
Unlike all other forges, Bitbucket does not expose pull-requests
as references in the upstream repository.  For that reason Forge
actually treats it as a semi-forge, not as forge whose API is not
supported yet.  This means that you cannot checkout pull-requests
locally.  There is little hope that this will ever get fixed; the
respective issue was opened six years ago and there has been no
progress since: @uref{https://bitbucket.org/site/master/issues/5814}.
@end itemize

@anchor{Bitbucket Hosts}
@appendixsubsubsec Bitbucket Hosts

@itemize
@item
@uref{https://bitbucket.org}
@end itemize

@node Supported Semi-Forges
@appendixsec Supported Semi-Forges

@anchor{Gitweb https//git-scmcom/docs/gitweb}
@appendixsubsec Gitweb https://git-scm.com/docs/gitweb

@anchor{Gitweb Caveats}
@appendixsubsubsec Gitweb Caveats

@itemize
@item
I could find only one public installation
(@uref{https://git.savannah.gnu.org}), which gives users the choice
between Gitweb and Cgit.  The latter seems more popular (not
just on this site).
@end itemize

@anchor{Cgit https//gitzx2c4com/cgit/about}
@appendixsubsec Cgit https://git.zx2c4.com/cgit/about

@anchor{Cgit Caveats}
@appendixsubsubsec Cgit Caveats

@itemize
@item
Different sites use different URL schemata and some of the bigger
sites use a fork.  For this reason Forge has to provide several
classes to support different variations of Cgit and you have to
look at their definitions to figure out which one is the correct
one for a particular installation.
@end itemize

@anchor{Cgit Hosts}
@appendixsubsubsec Cgit Hosts

@itemize
@item
@uref{https://git.savannah.gnu.org/cgit}
@item
@uref{https://git.kernel.org}
@item
@uref{https://repo.or.cz}
@end itemize

@anchor{Stgit https//codemadnessorg/git/stagit/file/READMEhtml}
@appendixsubsec Stgit https://codemadness.org/git/stagit/file/README.html

@anchor{Stgit Caveats}
@appendixsubsubsec Stgit Caveats

@itemize
@item
Stgit cannot show logs for branches beside "master".  For that
reason Forge takes users to a page listing the branches when they
request the log for a particular branch (even for "master" whose
log is just one click away from there).
@end itemize

@anchor{Stgit Hosts}
@appendixsubsubsec Stgit Hosts

@itemize
@item
@uref{https://git.suckless.org}
@end itemize

@anchor{Srht https//metasrht}
@appendixsubsec Srht https://meta.sr.ht

@anchor{Srht Caveats}
@appendixsubsubsec Srht Caveats

@itemize
@item
Srht cannot show logs for branches beside "master".  For that
reason Forge takes users to a page listing the branches when they
request the log for a particular branch (even for "master" whose
log is just one click away from there).
@end itemize

@anchor{Srht Hosts}
@appendixsubsubsec Srht Hosts

@itemize
@item
@uref{https://git.sr.ht}
@end itemize

@node FAQ
@appendix FAQ

This section lists some frequently asked questions.  Please see also
@uref{https://github.com/magit/forge/wiki/FAQ} for an extended list of common
issues.

@menu
* @code{error in process filter HTTP Error 502, "Bad gateway"}: @code{error in process filter HTTP Error 502 "Bad gateway"}. 
@end menu

@node @code{error in process filter HTTP Error 502 "Bad gateway"}
@appendixsec @code{error in process filter: HTTP Error: 502, "Bad gateway"}

This is a frequently occurring error.  Adding some formatting, the
full error is:

@lisp
error in process filter: ghub--signal-error: HTTP Error: 502,
  "Bad gateway", "/graphql",
  ((data . "null")
   (errors ((message . "Something went wrong while executing your query.
      This may be the result of a timeout, or it could be a GitHub bug.
      Please include `CC2C:4FEA:A1771C1:CBF40CE:5C33F7E5`
      when reporting this issue."))))
@end lisp

This indicates that something went wrong within Github's network.
Unfortunately the reason given is rather vague, but I believe this
usually happens when there are topics with one or two magnitudes more
posts than usual, which can cause GraphQL responses to become huge.

This can be countered in the affected repository by setting the Git
variable @code{forge.graphqlItemLimit}:

@example
git config --local forge.graphqlItemLimit 20
@end example

The default is specified using the @code{ghub-graphql-items-per-request},
which defaults to 50 (down from Github's default and maximum of 100).

Fetching less items per request results in more requests, which slows
down the process, which is why the default should not be too small,
but for some repositories a more aggressive limit is needed.

@node Keystroke Index
@appendix Keystroke Index

@printindex ky

@node Function and Command Index
@appendix Function and Command Index

@printindex fn

@node Variable Index
@appendix Variable Index

@printindex vr

@bye
